Flat cables for lighting
  • Flat cables for lighting

Flat cables for lighting

Ribbon cables are suitable for vertical folding and horizontal centralized wiring of multifunctional lighting fixtures in large venues such as TV studios, theaters, and sports venues. They are easy and neat to lay out, and have good heat dissipation and bending properties.

Product Name: Stage Lighting Special Cable

Model: ZB-SYFFR, ZB-SYFFDR, ZR-SYFR, ZR-KVVRP, DMX512 signal line

Ribbon cables are suitable for vertical folding and horizontal centralized wiring of multifunctional lighting fixtures in large venues such as TV studios, theaters, and sports venues. They are easy and neat to lay out, and have good heat dissipation and bending properties.

Note: According to customer requirements, it can be combined with (2 x 0.3), (3 x 0.3), (4 x 0.3), (2 x 0.5), (3 x 0.5), (4 x 0.5) or shielded control cores, as well as any combination of Category 5 cables (4 x 2 x 0.5), shielded network cables, and optical cables, with a total number of cores not exceeding 24.

The photography light source flexible cable uses 90 ° flame-retardant thermoplastic elastomer as insulation and sheath material, and the conductor adopts the process of first bundling and then twisting. Good flexibility, wear resistance, high current carrying capacity, wide temperature range adaptability, and good flame retardant performance, especially suitable for silicon box power supply and lighting power supply in theaters/studios.

The environmentally friendly cable is made of flame-retardant ultra flexible elastomer composite, which is non-toxic, free of harmful heavy metals, and has good flexibility. The product has been tested by ****** Fire Product Quality Supervision and Inspection Center, and its flame-retardant performance has passed Class B bundle combustion test. The environmentally friendly cable has passed the Swiss SGS environmental testing and is free of halogens and harmful heavy metals, meeting the requirements of the EU RHOS environmental standards.

The audio signal cable has a small outer diameter, light weight, high flexibility, and good transmission performance, which can ensure the accuracy of stage lighting control. Adopting aluminum foil or aluminum foil with fine copper wire woven composite shielding form, it has stable electrical performance and good anti-interference performance, suitable for use in light color converters, light control, and audio installation.

The speaker cable is made of high-purity single crystal copper and oxygen free copper composite twisted together. Polyvinyl or polyolefin is used as the insulation sheath material, which has good flexibility, high and low temperature performance, wear resistance, large capacity, good flame retardant performance, and low smoke emission during combustion, without halogen or extremely low halogen content. It is suitable for connecting cables between speakers and receivers or amplifiers.

The mobile performance plug-in cable adopts high elastic insulation sheath material, which makes the cable more flexible. The welding of the three core European standard waterproof plug and the 19 core plug adopts imported equipment and materials, with uniform and firm welding points and good conductivity.

Main technical performance

The insulated wire core undergoes a voltage test of 2500V/5min without breakdown.

The finished cable undergoes a voltage test of 2000V/5min without breakdown.

The mechanical strength (bending test) of flexible cables should withstand 15000 cycles of reciprocating motion, that is, 30000 cycles of one-way motion, and there should be no current interruption or short circuit between conductors (the tested sample should be subjected to voltage test according to regulations and should not break through).

The flame retardancy of cables shall comply with the requirements of GB/T18380.3-2001 Electrical Wire Current Burning Test Method Part 3: Vertical Burning Test Method for Bundled Wires or Cables (equivalent to IEC 60332-3:1992).

Delivery length

The length of the coil shall not be less than 1000 meters, and the length of the coil shall be 100 meters

Short sections with a length of no less than 20 meters are allowed for delivery, and their quantity should not exceed 10% of the total delivery length, and the number of short sections in each piece should not exceed 2.

According to the agreement between both parties, it is allowed to deliver any length with a measurement error not exceeding ± 0.5%.