Category 5, 4-pair unshielded twisted pair cable
  • Category 5, 4-pair unshielded twisted pair cable

Category 5, 4-pair unshielded twisted pair cable

Super five types of unshielded twisted pair cables are suitable for unshielded horizontal wiring applications. In testing at a frequency of 100 MHz, the cables fully comply with the performance standards for horizontal wiring established by ANSI/EIA-568-A and ANSI/EIA-568-B, and their performance in terms of near-end crosstalk, attenuation value, return loss, and impedance is strengthened and further guaranteed.

Super five types of unshielded twisted pair cables are suitable for unshielded horizontal wiring applications. In testing at a frequency of 100 MHz, the cables fully comply with the performance standards for horizontal wiring established by ANSI/EIA-568-A and ANSI/EIA-568-B, and their performance in terms of near-end crosstalk, attenuation value, return loss, and impedance is strengthened and further guaranteed.

1. Structure

0.51mm bare copper wire is insulated with polyethylene (PE) as the insulation layer. Two sets of insulated wires are twisted into a pair, totaling four pairs. The outer layer of the cable is covered with polyvinyl chloride sheath.

2. Standard

YD/T1019-2001

3. Purpose

Broadband high-speed network transmission, local area network communication, and network cabling for intelligent buildings. The application scope supports various network applications such as 10BaseT, 100BaseT, ATM Ethernet, Token Ring, TP-PMD voice, telephone, and multimedia.