The YTZ-150 resistance remote pressure gauge and the YTZ-150B stainless steel resistance remote pressure gauge are suitable for measuring the pressure of gases and liquids that do not corrode copper and copper alloys, or stainless steel alloys. The resistance remote pressure gauge transmits the measured value to the secondary instrument far away from the measurement point through a locator type sensor installed inside the instrument, achieving centralized detection and remote control. In addition, the resistance remote pressure gauge can simultaneously indicate pressure on site, facilitating on-site process inspection.
The resistance remote transmission pressure gauge can be connected to a diaphragm isolator (diaphragm body) to make a diaphragm type resistance remote transmission pressure gauge. It is used to measure the pressure of corrosive, viscous, and easily crystalline media.
Main technical indicators of resistance remote transmission pressure gauge
1. Basic error: plus or minus 1.6 levels.
2. Measurement range: (Mpa)
(Special specifications, please specify when placing an order)
0-0.16 0-0.25 0-0.4 0-0.6
0.1 0-1.6 0-2.5 0-4
0-6 0-10 0-16 0-25 0-40
-0.1-0.06-0.1-0.15-0.1-0.3-0.1-0.5
-0.1-0.9-0.1-1.5-0.1-2.4
3. Working conditions (1) Environmental temperature: -40-60 ℃
(2) Work pressure: Static load:
Used up to 3/4 of the upper measurement limit value
Alternating load: used up to 2/3 of the measured upper limit value
Short term pressure: used to measure the upper limit value
(3) Relative temperature:<85%
4. Technical data of sliding wire resistance transmitter: Starting resistance: 3-20 Ω
Full scale resistance: 340-400 Ω
Applied voltage at the terminal<6V
5. Instrument outer diameter: ± 150mm
6. Connection size: M20X1.5
English
